Rwood Other than Wood, a line of engineered biocompatible wood for outdoor.
It’s produced recycling the first processed wood and plastics, and at the end of its use can also be recycled, so it is a material that does not pollute and is reused.
The composition of the profiles Rwood is based on 60% bamboo and 40% HDPE (high density polyethylene) with relative plastic additives.
The range includes all the elements and their fittings for ease of application. The profiles Rwood can be used as partial or full decoration of facades, sunscreens protect both vertical and horizontal, in laying floors or partition walls in exterior.
Versatile and elegant, but also modern, it offers a wide range of shapes and colors that are well suited to any type of environment.
Maintaining the warm and welcoming feel of wood, it offers the best performance of the plastic material, safeguarding both the ecological and economic aspect.
All products Rwood, respond to the following features and specifications that characterize a unique choice in the field of outdoor finish for composite wood products:
The various types of products Rwood are used for the following applications:
The main characteristics of the Rwood products are:
The wpc slats are uniformly subject (in the same atmospheric conditions) to variations in color in the first period after the outdoor laying (approximately 5-10% compared to the original color), after which the color will tend to stabilize and keep itself long. Can happen and then be tolerated slight differences in color between the slats, this difference can occur in different production batches.
No further maintenance is required, except for a routine cleaning.
To clean the Rwood products is recommended to remove dirt and debris using soap, warm water and a stiff bristle broom, do not use any type of solvents or aggressive product.
Before using a cleaning product, it is recommended to test on a small area in an inconspicuous place, to determine whether the product will cause an undesired discoloration.
Lario is a system of slats made in ecological composite wood (WPC) specifically for outdoor, strong and innovative, classic solution for the realization of very decorative outdoor floors.
The Lario’s slats are in solid profile, guarantee dimensional stability and greater resistance.
Each slats can be used on both sides, thus obtaining a customized aesthetic effect.
A solid and uniform ground surface is the prerequisite for the installation of Rwood outdoor flooring.
Choose from 5 standard colors.
The boards are supplied with aluminum support and hanging system Clip.
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 145 X 20 |
| WEIGHT kg/m | 3,50 |
| WEIGHT kg/m2 | 23,30 |
| STANDARD LENGTH | 220 |
Square self-locking pre-assembled made with WPC product, total dimensin 31x31 cm, consisting of the substructure in PVC with nr 4 Rwood slats on top.
The squares are easily assembled thanks to the system of connection and simple fixing. No need to use any tool.
An area of solid and uniform ground surface is the prerequisite for the installation of Rwood outdoor flooring.
Available color COTTO
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 310 X 310 X 22 |
| WEIGHT kg/each module | 1,50 |
| WEIGHT kg/m2 | 15,10 |
Varenna combines the natural look of a wooden fence with the advantages of a high-tech material with maximum weather resistance, stability, ease of cleaning and design trends on both sides.
Structure consisting of special profile pillars in aluminum termo-painted with Black color.
Dimensions: 90 x 90 mm within which are inserted the slats in WPC pre-formed for assembly.
Provided a perforated plate to be fixed to the floor on which insert the aluminum pillar and resin caps for closing the top of the two pillars.
Overall dimensions of the wall composed 180x167 cm
Available Color PEARL
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 145 X 20 |
| WEIGHT kg/m | 1,930 |
| WEIGHT kg/m2 | 13,30 |
| STAVE WIDTH | 176 |
| FINISHED PANEL DIMENSION cm | w. 180 x h. 167 |
Slats with perforated profile made of composite wood, usable on both sides, thus obtaining a customized aesthetic effect.
Possibility to cut the slats tailored on project.
The slats are supplied with a hanging system with aluminum substructure and clips.
Available Color PEARL.
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 140 X 21 |
| WEIGHT kg/m | 2,18 |
| WEIGHT kg/m2 | 14,50 |
| STANDARD LENGTH | 220 |
Wood composite profile with different sizes and perforation specifically to avoid an excessive weight of the profile especially for the type Bellagio Big.
The possility to position the profiles with different inclinations (horizontal, vertical, oblique) allows to obtain a customized aesthetic effect, so going to optimize also the solar shield according to needs.
The profile Bellagio has been created for use as coating / decoration, not for structural use. For non compact surfaces (eg. Decorative structures, shading etc..) we recommend the use of stainless steel structures.
Sunscreen with aluminum substructure to evaluate a project.
Possibility to supply PVC black caps to close the side profile.
Available Color: Cotto, Cotto antico, Ardesia, Terra.
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 70 X 40 |
| WEIGHT kg/m | 1,88 |
| WEIGHT kg/m2 | 23,40* |
| STANDARD LENGTH | 240 |
*WEIGHT BASED ON MATERIAL ONLY (LOAD-BEARING STRUCTURE EXCLUDED)
Wood composite profile with different sizes and perforation specifically to avoid an excessive weight of the profile especially for the type Bellagio Big.
The possility to position the profiles with different inclinations (horizontal, vertical, oblique) allows to obtain a customized aesthetic effect, so going to optimize also the solar shield according to needs.
The profile Bellagio has been created for use as coating / decoration, not for structural use. For non compact surfaces (eg. Decorative structures, shading etc..) we recommend the use of stainless steel structures.
Sunscreen with aluminum substructure to evaluate a project.
Possibility to supply PVC black caps to close the side profile.
Available Color: Cotto, Cotto antico, Ardesia, Terra.
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 40 X 40 |
| WEIGHT kg/m | 0,96 |
| WEIGHT kg/m2 | 12,00* |
| STANDARD LENGTH | 240 |
*WEIGHT BASED ON MATERIAL ONLY (LOAD-BEARING STRUCTURE EXCLUDED)
Wood composite profile with different sizes and perforation specifically to avoid an excessive weight of the profile especially for the type Bellagio Big.
The possility to position the profiles with different inclinations (horizontal, vertical, oblique) allows to obtain a customized aesthetic effect, so going to optimize also the solar shield according to needs.
The profile Bellagio has been created for use as coating / decoration, not for structural use. For non compact surfaces (eg. Decorative structures, shading etc..) we recommend the use of stainless steel structures.
Sunscreen with aluminum substructure to evaluate a project.
Possibility to supply PVC black caps to close the side profile.
Available Color: Cotto, Cotto antico, Ardesia, Terra.
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 60 X 40 |
| WEIGHT kg/m | 1,75 |
| WEIGHT kg/m2 | 21,90* |
| STANDARD LENGTH | 240 |
*WEIGHT BASED ON MATERIAL ONLY (LOAD-BEARING STRUCTURE EXCLUDED)
Wood composite profile with different sizes and perforation specifically to avoid an excessive weight of the profile especially for the type Bellagio Big.
The possility to position the profiles with different inclinations (horizontal, vertical, oblique) allows to obtain a customized aesthetic effect, so going to optimize also the solar shield according to needs.
The profile Bellagio has been created for use as coating / decoration, not for structural use. For non compact surfaces (eg. Decorative structures, shading etc..) we recommend the use of stainless steel structures.
Sunscreen with aluminum substructure to evaluate a project.
Possibility to supply PVC black caps to close the side profile.
Available Color: Cotto, Cotto antico, Ardesia, Terra.
TECHNICAL DATA
MAIN FEATURES
| DIMENSION mm | 80 X 35 |
| WEIGHT kg/m | 2,29 |
| WEIGHT kg/m2 | 32,70* |
| STANDARD LENGTH | 240 |
*WEIGHT BASED ON MATERIAL ONLY (LOAD-BEARING STRUCTURE EXCLUDED)
Tessitura Tele Metalliche ROSSI OLIVIERO & C. s.r.l. | Via dell'Artigianato, 16 - 22079 Villa Guardia CO | Italia
TIME OPENING WAREHOUSE:
8.00/12.00 - 13.30/17.30
Showroom open Monday to Friday by appointment.
For product inquiries please write to: info@rwood.it
